English  |  正體中文  |  简体中文  |  全文筆數/總筆數 : 8557/14866 (58%)
造訪人次 : 1403979      線上人數 : 2485
RC Version 6.0 © Powered By DSPACE, MIT. Enhanced by NTU Library IR team.
搜尋範圍 查詢小技巧：
  • 您可在西文檢索詞彙前後加上"雙引號"，以獲取較精準的檢索結果
  • 若欲以作者姓名搜尋，建議至進階搜尋限定作者欄位，可獲得較完整資料
    •  進階搜尋
    主頁 ‧ 登入 ‧ 上傳 ‧ 說明 ‧ 關於CHUR ‧ 管理 到手機版

    類別瀏覽

    正在載入社群分類, 請稍候....

    年代瀏覽

    正在載入年代分類, 請稍候....

    "Wu, Horng-yu"的相關文件 

    回到依作者瀏覽

    顯示 83 項.

    類別 日期 題名 作者 檔案
    [機械工程學系] 研討會論文 2003 平面應變對5083超塑性鋁合金變形特性之影響 吳泓瑜; Wu, Horng-yu
    [機械工程學系] 研討會論文 2003 8090超塑性鋁合金多軸應力狀態之金屬流特性分析 吳泓瑜; Wu, Horng-yu
    [機械工程學系] 期刊論文 2004 Effect of multiaxial stress on deformation characteristics of 8090 superplastic aluminum alloy 吳泓瑜; Wu, Horng-yu
    [機械工程學系] 研討會論文 2004 潤滑劑對5083超塑性鋁合金成形特性之影響 吳泓瑜; Wu, Horng-yu
    [機械工程學系] 期刊論文 2005 Influence of Extrusion Variables on Bonding Effect of Hollow Shaped 6463 Aluminum Alloy 吳泓瑜; Wu, Horng-yu
    [機械工程學系] 研討會論文 2005 超輕鎂鋰合金性質之研究 吳泓瑜; Wu, Horng-yu
    [機械工程學系] 期刊論文 2005 Analysis of Damaged Turbine Blades of Power Generator 吳泓瑜; Wu, Horng-yu
    [機械工程學系] 期刊論文 2006 Study of Deformation Characteristics of a Superplastic 5083 Al Alloy during Bi-axial Deformation with Lubrication 吳泓瑜; Wu, Horng-yu
    [機械工程學系] 期刊論文 2006 Cavitation characteristics of a superplastic 5083 Al alloy during gas blow forming 吳泓瑜; Wu, Horng-yu
    [機械工程學系] 期刊論文 2006 Microstructural Characterization of a Mg-9%Li-1%Zn Alloy 吳泓瑜; Wu, Horng-yu
    [機械工程學系] 期刊論文 2006 Effect of Lubrication on Deformation Characteristics of A Superplastic 5083 Al Alloy during Bi-axial Deformation 吳泓瑜; Wu, Horng-yu
    [機械工程學系] 研討會論文 2006 LZ91鎂鋰合金之拉伸性質 吳泓瑜; Wu, Horng-yu
    [機械工程學系] 期刊論文 2007 Effect of die surface roughness on deformation characteristics and cavitation during blow forming in a superplastic 5083 alloy 吳泓瑜; Wu, Horng-yu
    [機械工程學系] 研討會論文 2007 Mg-9%Li-1%Zn合金薄板之機械性質與成形性 吳泓瑜; Wu, Horng-yu
    [機械工程學系] 研討會論文 2007 Microstructural Characterization and Mechanical Behavior of an Mg-9%Li-1%Zn Alloy 吳泓瑜; Wu, Horng-yu
    [機械工程學系] 研討會論文 2008 LZ60薄板片高溫下之機械性質和成形性 吳泓瑜; Wu, Horng-yu
    [機械工程學系] 研討會論文 2008 LZ90鎂合金之成形性及變形行為 吳泓瑜; Wu, Horng-yu
    [機械工程學系] 研討會論文 2008 AZ31B-O鎂合金薄板機械性質與成形性之研究 吳泓瑜; Wu, Horng-yu
    [機械工程學系] 研討會論文 2008 Aging behavior of Mg–Li–Al–Zn alloy with Scandium addition 吳泓瑜; Wu, Horng-yu
    [機械工程學系] 研討會論文 2008 熱處理對鋁鈧合金在3.5％NaCl溶液中腐蝕性質之研究 吳泓瑜; Wu, Horng-yu
    [機械工程學系] 研討會論文 2008 Microstructures and mechanical properties of an Mg–Li–Al–Zn alloy with minor Sc addition 吳泓瑜; Wu, Horng-yu
    [機械工程學系] 研討會論文 2008 Al-Sc合金在3.5％NaCl溶液下不同PH值之腐蝕性質研究 吳泓瑜; Wu, Horng-yu
    [機械工程學系] 期刊論文 2008 Mechanical properties and formability of an Mg–6%Li–1%Zn alloy thin sheet at elevated temperatures 吳泓瑜; Wu, Horng-yu
    [機械工程學系] 期刊論文 2008 Deformation behavior in superplastic 5083 Al alloy during biaxial gas pressure forming with lubrication 吳泓瑜; Wu, Horng-yu
    [機械工程學系] 期刊論文 2008 Mechanical and anisotropic behaviors of Mg–Li–Zn alloy thin sheets 吳泓瑜; Wu, Horng-yu
    [機械工程學系] 期刊論文 2008 Microstructure and mechanical behavior of LZ91 Mg alloy processed by rolling and heat treatments 吳泓瑜; Wu, Horng-yu
    [機械工程學系] 期刊論文 2008 Deformation behaviour and formability of LZ90 Mg alloy 吳泓瑜; Wu, Horng-yu
    [機械工程學系] 期刊論文 2009 Effects of minor Scandium addition on the properties of Mg-Li-Al-Zn alloy 吳泓瑜; Wu, Horng-yu
    [機械工程學系] 期刊論文 2009 Effect of heat treatment on the microstructure and mechanical properties of the consolidated Mg alloy AZ91D machined chips 吳泓瑜; Wu, Horng-yu
    [機械工程學系] 期刊論文 2009 Cavitation behavior in superplastic 5083 Al alloy during multiaxial gas blow forming with lubrication 吳泓瑜; Wu, Horng-yu
    [機械工程學系] 研討會論文 2009 AZ31鎂合金在不同溫度下滾軋方向對機械性質的影響 吳泓瑜; Wu, Horng-yu
    [機械工程學系] 研討會論文 2009 鎂合金AZ31B薄板片之高溫環境下氣壓成形與應變分析 吳泓瑜; Wu, Horng-yu
    [機械工程學系] 研討會論文 2009 不同鍍鋅鋼板於3%NaCl酸性溶液中腐蝕性質研究 吳泓瑜; Wu, Horng-yu
    [機械工程學系] 研討會論文 2009 鎂合金薄板片高溫機械性質與超塑成形特性研究 吳泓瑜; Wu, Horng-yu
    [機械工程學系] 研討會論文 2009 AZ31B薄板片於多軸應變之超塑性變形與成形性分析 吳泓瑜; Wu, Horng-yu
    [機械工程學系] 研討會論文 2009 鎂合金AZ31B-O薄板片在不同溫度下超塑性變形分析 吳泓瑜; Wu, Horng-yu
    [機械工程學系] 研討會論文 2009 Deformation characteristics of fine-grained magnesium alloy AZ31B thin sheet during fast gas blow forming 吳泓瑜; Wu, Horng-yu
    [機械工程學系] 研討會論文 2009 AZ31B-H24薄板片之不同滾軋方向於高溫機械性質分析 吳泓瑜; Wu, Horng-yu
    [機械工程學系] 研討會論文 2009 加壓程序對鎂合金AZ31B-O薄板之成形特性分析 吳泓瑜; Wu, Horng-yu
    [機械工程學系] 研討會論文 2009 AZ31B-O鎂合金薄板單軸向拉伸之流變性質研究 吳泓瑜; Wu, Horng-yu
    [機械工程學系] 期刊論文 2009 Effects of Age Heat Treatment and Thermomechanical Processing on Microstructure and Mechanical Behavior of LAZ1010 Mg Alloy 吳泓瑜; Wu, Horng-yu
    [機械工程學系] 期刊論文 2009 Plastic anisotropy and strain-hardening behavior of Mg−6%Li−1%Zn alloy thin sheet at elevated temperatures 吳泓瑜; Wu, Horng-yu
    [機械工程學系] 期刊論文 2009 Deformation characteristics and cavitation during multiaxial blow forming in superplastic 8090 alloy 吳泓瑜; Wu, Horng-yu
    [機械工程學系] 研討會論文 2009 AZ31B-H24鎂合金薄板材拉伸特性之研究 吳泓瑜; Wu, Horng-yu
    [機械工程學系] 其他教師著作 2009 鎂合金AZ31B-O薄板片在不同溫度下超塑性變形分析 吳泓瑜; Wu, Horng-yu
    [機械工程學系] 期刊論文 2010 Effect of pressurization profile on the deformation characteristics of fine-grained AZ31B Mg alloy sheet during gas blow forming 吳泓瑜; Wu, Horng-yu
    [機械工程學系] 期刊論文 2010 Deformation characteristics of fine-grained magnesium alloy AZ31B thin sheet during rapid gas blow forming 吳泓瑜; Wu, Horng-yu
    [機械工程學系] 期刊論文 2010 Tensile flow behavior of fine-grained AZ31B magnesium alloy thin sheet at elevated temperatures 吳泓瑜; Wu, Horng-yu
    [機械工程學系] 期刊論文 2010 Strain-Hardening Behavior of Mg-Li-Zn Alloy Thin Sheets under Tension 吳泓瑜; Wu, Horng-yu
    [機械工程學系] 期刊論文 2010 Mechanical properties and strain-hardening behavior of Mg alloy AZ31B-H24 thin sheet 吳泓瑜; Wu, Horng-yu
    [機械工程學系] 期刊論文 2010 Tensile flow and strain-hardening behaviors of dual-phase Mg-Li-Zn alloy thin sheets 吳泓瑜; Wu, Horng-yu
    [機械工程學系] 研討會論文 2010 AZ31B-H24在不同溫度條件下等軸應變之成形性分析 吳泓瑜; Wu, Horng-yu
    [機械工程學系] 研討會論文 2010 Deformation Characteristics of AZ31B-O Mg Alloy Sheet during Rapid Gas Blow Forming 吳泓瑜; Wu, Horng-yu
    [機械工程學系] 研討會論文 2010 Rapid Gas Blow Formability of Fine-Grained AZ31B Mg Alloy Sheet 吳泓瑜; Wu, Horng-yu
    [機械工程學系] 研討會論文 2010 Flow Behavior of AZ31B-O Mg Alloy Sheet under Tension at Elevated Temperatures 吳泓瑜; Wu, Horng-yu
    [機械工程學系] 研討會論文 2010 鎂合金AZ31B-O於超塑性氣壓成形之顯微組織影響研究 吳泓瑜; Wu, Horng-yu
    [機械工程學系] 研討會論文 2010 鎂板滾壓方向運用於超塑性之成形特性 吳泓瑜; Wu, Horng-yu
    [機械工程學系] 研討會論文 2010 Effect of Loading Orientation and Deformation rate on the Formability of AZ31B Mg Alloy Thin Sheet 吳泓瑜; Wu, Horng-yu
    [機械工程學系] 研討會論文 2010 Rapid Gas Blow Forming of Fine-Grained Magnesium Alloy AZ31B Thin Sheet 吳泓瑜; Wu, Horng-yu
    [機械工程學系] 研討會論文 2010 Mechanical Properties and Strain-hardening Behaviors of a few Mg-Li-Zn Alloy Thin Sheets 吳泓瑜; Wu, Horng-yu
    [機械工程學系] 研討會論文 2010 鎂合金快速氣壓成形之特性分析 吳泓瑜; Wu, Horng-yu
    [機械工程學系] 研討會論文 2010 Strain-Hardening Behavior of Mg-Li-Zn Alloy Thin sheets under Tension 吳泓瑜; Wu, Horng-yu
    [機械工程學系] 期刊論文 2011 Anisotropic and tensile flow behaviors of Mg alloy AZ31B thin sheet in H24 condition at elevated temperatures 吳泓瑜; Wu, Horng-yu
    [機械工程學系] 期刊論文 2011 Compressive flow behavior of AZ61 Mg alloy at elevated temperatures 吳泓瑜; Wu, Horng-yu
    [機械工程學系] 研討會論文 2011 Hot Compressive Flow Behavior of Inconel 600 Superalloy 吳泓瑜; Wu, Horng-yu
    [機械工程學系] 研討會論文 2011 Tensile flow behavior in Inconel 600 alloy sheet at elevated temperatures 吳泓瑜; Wu, Horng-yu
    [機械工程學系] 研討會論文 2011 Tensile properties and shallow pan rapid gas blow forming of commercial fine-grained Mg alloy AZ31B thin sheet 吳泓瑜; Wu, Horng-yu
    [機械工程學系] 研討會論文 2011 Compressive Flow Behavior of AZ61 Mg Alloy at Elevated Temperatures 吳泓瑜; Wu, Horng-yu
    [機械工程學系] 期刊論文 2012 Hot deformation characteristics and strain-dependent constitutive analysis of Inconel 600 superalloy 吳泓瑜; Wu, Horng-yu
    [機械工程學系] 期刊論文 2012 Dynamic behavior of extruded AZ61 Mg alloy during hot compression 吳泓瑜; Wu, Horng-yu
    [機械工程學系] 期刊論文 2012 Hot deformation characteristics of as-cast and homogenized AZ61 Mg alloys under compression 吳泓瑜; Wu, Horng-yu
    [機械工程學系] 期刊論文 2012 Rate and Orientation Dependence of Formability in Fine-Grained AZ31B-O Mg Alloy Thin Sheet 吳泓瑜; Wu, Horng-yu
    [機械工程學系] 研討會論文 2012 鎳基超合金Hastelloy X高溫變形特性及組合關係分析 吳泓瑜; Wu, Horng-yu
    [機械工程學系] 研討會論文 2012 Constitutive Analysis of Ni-Base Superalloy Hastelloy X under Hot Compression Based on Thermodynamics 吳泓瑜; Wu, Horng-yu
    [機械工程學系] 期刊論文 2013 Constitutive Analysis of Ni-Base Superalloy Hastelloy X under Hot
    Compression Based on Thermodynamics    		 吳泓瑜; Wu, Horng-yu
    [機械工程學系] 期刊論文 2013 Constitutive and Processing Map Analyses of Stainless Steel 316 under
    Hot Compression    		 吳泓瑜; Wu, Horng-yu
    [機械工程學系] 期刊論文 2013 Processing Map for Hot Deformation of Homogenized AZ61 Mg Alloy 吳泓瑜; Wu, Horng-yu
    [機械工程學系] 期刊論文 2013 Hot compressive flow stress modeling of homogenized AZ61 Mg alloy using strain-dependent constitutive equations 吳泓瑜; Wu, Horng-yu
    [機械工程學系] 期刊論文 2013 Flow Behavior and Microstructural Evolution of 316 Stainless Steel
    under Hot Compression    		 吳泓瑜; Wu, Horng-yu
    [機械工程學系] 期刊論文 2013 Strain-dependent constitutive analysis of extruded AZ61 Mg alloy under hot compression 吳泓瑜; Wu, Horng-yu
    [機械工程學系] 研討會論文 2013 Flow Behavior and Microstructural Evolution of 316 Stainless Steel under Hot Compression 吳泓瑜; Wu, Horng-yu
    [機械工程學系] 研討會論文 2013 鎳基超合金Hastalloy-X熱變形組合關係分析 吳泓瑜; Wu, Horng-yu
    [機械工程學系] 研討會論文 2013 Processing Map for Hot Deformation of Homogenized AZ61 Mg Alloy 吳泓瑜; Wu, Horng-yu

    DSpace Software Copyright © 2002-2004  MIT &  Hewlett-Packard  /   Enhanced by   NTU Library IR team Copyright ©   - 回饋