The Study of Effects of Cutting Parameters and PVD-Coatings on Tool Life of Micro End Drill by Using Taguchi Method

Chung-Hua University Repository > 工學院 > 機械工程學系 > 研討會論文 > Item 987654321/34600

請使用永久網址來引用或連結此文件: http://chur.chu.edu.tw/handle/987654321/34600

題名:	The Study of Effects of Cutting Parameters and PVD-Coatings on Tool Life of Micro End Drill by Using Taguchi Method
作者:	邱奕契 Chiou, Yih-Chih
貢獻者:	機械工程學系 Mechanical Engineering
關鍵詞:	Taguchi method;Micro-end-milling;Flank Wear;PVD-Coatings Taguchi method;Micro-end-milling;Flank Wear;PVD-Coatings
日期:	2008
上傳時間:	2014-06-27 02:56:45 (UTC+8)
摘要:	In this study, a serial of dry milling experiments of 6061 aluminium alloy using single edge rhombus micro end mills were performed. The purpose is to examine the influences of various control factors on tool wear. Control factors under investigation incl In this study, a serial of dry milling experiments of 6061 aluminium alloy using single edge rhombus micro end mills were performed. The purpose is to examine the influences of various control factors on tool wear. Control factors under investigation incl
顯示於類別:	[機械工程學系] 研討會論文

文件中的檔案:

檔案	描述	大小	格式	瀏覽次數
s_M211_0207.pdf		27Kb	Adobe PDF	50	檢視/開啟

在CHUR中所有的資料項目都受到原著作權保護.